OXYGEN ACTIVATOR
of hydrogen sulphide/sewer gas.
Swedish-made. Free of chemical additives.
Swedish-made. Free of chemical additives.
Download:
Technical data
Max. pressure/PN: 6 bar
Pump starts per 24 hours: 15 starts max.
Operating temperature: max 40 °C
Drain for backwashing required: Yes
Pressure tank required: min 60 L
Included in delivery
- Oxygen activator
Functional description
Hydrogen sulphide/sewer gas is removed by aeration in the oxygen activator. New air is supplied automatically
on each pump start. While the pump is running, a small amount of water constantly flows out of the wastewater pipe. The oxygen activator can also remove other odours from the water.
When the oxygen activator is running, the water will be “milky” in colour when poured into a glass. Alter+ has limited solubility and therefore cannot push the pH above its limit value. This makes it very consumerfriendly.
Technical data
- Max. pressure/PN…………………………………….. 6 bar
- Pump starts per 24 hours:……………………..15 starts max.
- Operating temperature:…………………………max 40 °C
- Drain for backwashing required……………………. Yes
- Pressure tank required………………………………..min 60 L
Download:
Layout diagram
2. Pressure switch
3. Pressure tank/membrane pressure tank
4. Oxygen activator
| Maximum flow* | |
| Model | l/min |
| OXYGEN ACTIVATOR 83 | 40 |
* The oxygen activator needs to rest for at least 1 minute before the next pump start.
| Dimensions, mm | |||||
| Model | Item no. | Height | Width | Depth | Connection |
| OXYGEN ACTIVATOR 83 | 100750 | 760 | 510 | 120 | G20 x G25 |
